LEGRAND Raritan SRC-0100, User Manual

Page: 148 / 698

Chapter 6: Using the Web Interface
136
Note: Per default you can turn on as many dry contact actuators as you
want, but only one "powered dry contact" actuator can be turned on at
the same time. To change this limitation of "powered dry contact"
actuators, modify the active powered dry contact setting. See
Peripherals
(on page 115).
Other operations:
You can go to another sensor's or actuator's data/setup page by clicking
the selector on the top-left corner.
Z Coordinate Format
Z coordinates refer to vertical locations of Raritan's environmental
sensor packages. You can use either the number of rack units or a
descriptive text to describe Z coordinates.
For a Z coordinate example, see
Sensor/Actuator Location Example
(on
page 137).
To configure Z coordinates:
1. Determine the Z coordinate format on
Peripherals
(on page 115).
Available Z coordinate formats include:
Format Description
Rack units The height of the Z coordinate is measured in
standard rack units.
When this is selected, you can type a numeric
value in the rack unit to describe the Z coordinate