LEGRAND Raritan PX3TS, User Manual

Page: 667 / 911

Chapter 9: Using the Command Line Interface
647
Role Configuration Commands
A role configuration command begins with role .
Creating a Role
This command creates a new role, with a list of semicolon-separated privileges
assigned to the role.
config:# role create <name> <privilege1>;<privilege2>;<privilege3>...
If a specific privilege contains any arguments, that privilege should be followed
by a colon and the argument(s).
config:# role create <name> <privilege1>:<argument1>,<argument2>...;
<privilege2>:<argument1>,<argument2>...;
<privilege3>:<argument1>,<argument2>...;
...
Variables:
•
<name> is a string comprising up to 32 ASCII printable characters.
•
<privilege1>, <privilege2>, <privilege3> and the like are names of the
privileges assigned to the role. Separate each privilege with a semi-colon.
See
All Privileges (on page 647).
•
<argument1>, <argument2> and the like are arguments set for a particular
privilege. Separate a privilege and its argument(s) with a colon, and
separate arguments with a comma if there are more than one argument
for a privilege.
All Privileges
This table lists all privileges. Note that available privileges vary according to the
model you purchased. For example, a PX3TS device without the outlet
switching function does not have the privilege "switchOutlet."
Privilege Description
acknowledgeAlarms Acknowledge Alarms
adminPrivilege Administrator Privileges
changeAssetStripConfiguration Change Asset Strip Configuration
changeAuthSettings Change Authentication Settings