LEGRAND Raritan PX3-3000 Series, User Manual

Page: 835 / 977

Appendix G: PX3 Models with Residual Current Monitoring
814
Showing Residual Current Monitoring Information
This command syntax shows the residual current monitoring (RCM)
information, which is only available on the models with RCM. The
information displayed include the RCM current, state and thresholds.
For Type B "M18" models, this command shows the information of all
RCM sensors of the same inlet at a time.
# show residualCurrentMonitor <n>
Variables:

<n> is one of the options:
all, or a number.
Option Description
all Displays the RCM information of all inlets.
Tip: You can also type the command without
adding this option "all" to get the same data.
A specific inlet
number Displays the RCM information of the specified inlet
only.
An inlet number needs to be specified only when
there are more than 1 inlet on your PDU.
Tip -- other RCM-related "show" commands:

For models detecting residual current per inlet, see Inlet Sensor
Threshold Information (on page 533)

For models detecting residual current per inlet pole, see
Inlet Pole
Sensor Threshold Information
(on page 535)