LEGRAND Raritan PX3-3000 Series, User Manual

Page: 368 / 977

Chapter 6: Using the Web Interface
347

If you type a value, the value must be followed by a time unit,
such as '10 d.' See
Time Units
(on page 180).
3. Click Save.
To force users to create strong passwords:
1. Select the 'Enabled' checkbox of Strong Passwords to activate the
strong password feature. The following are the default settings:
Minimum length = 8 characters
Maximum length = 32 characters
At least one lowercase character = Required
At least one uppercase character = Required
At least one numeric character = Required
At least one special character = Required
Number of forbidden previous passwords = 5
Note: The maximum password length accepted by PX3 is 64
characters.
2. Make changes to the default settings as needed.
3. Click Save.
Enabling the Restricted Service Agreement
The restricted service agreement feature, if enabled, forces users to
read a security agreement when they log in to the PX3.
Users must accept the agreement, or they cannot log in.
An event notifying you if a user has accepted or declined the agreement
can be generated. See
Default Log Messages (on page 360)
To enable the service agreement:
1. Click Device Settings > Security > Service Agreement.
2. Select the 'Enforce restricted service agreement' checkbox.
3. Edit or paste the content as needed.

A maximum of 10,000 characters can be entered.
4. Click Save.