LEGRAND Raritan MCD Series, Manual, Page: 44 / 83

•
ID:
•
5. Now move it to the position you prefer by pressing the arrow keys.
6. To confirm the new position, press Esc. Then the OSD returns to the SETUP page shown in step 2.
7. To exit the SETUP page, press Esc.
Channel Scan
You can turn on the Scan function to have the MCD switch automatically display the video of every
channel one by one on the screen. If the system scans a channel port where a 2nd-tier switch is
connected, it will scan all channels of the 2nd-tier switch first before proceeding with the next channels
on the base switch.
Before turning on the scan function, make sure the Scan Mode and Scan Rate settings meet your needs.
See Available Settings and Options (on page 42).
▶
To activate the channel scan:
1. If the OSD is not displayed, press the hot key 3 times.
•
The default hot key is 'Scroll Lock.' To change it, see System Settings (on page 41).
•
2. On the Selection Menu, press F2 to activate the scan mode.
3. The scan starts from the channel next to the currently-selected channel.
A channel ID including the word 'SCAN' will be displayed for each scanned channel. The
following illustrates the channel IDs during scanning.
• Generic channel ID comprising the word 'SCAN', channel number and name •
44