before you start
Review this guide in its entirety. Consult an electrician with any questions or if
you are unsure of your abilities.
Warning: Incorrect installation could result in death, serious injury, and/or
damage to your home or devices.
Caution: To reduce the risk of injury and/or overheating and damage to
other equipment:
• For dry, indoor use only.
• Do not use to power medical
equipment.
• Not suitable as a disconnecting
means.
• Do not use with loads exceeding the
device load rating.
what you need
REQUIRED:
Phillips-head screwdriver
Flat blade screwdriver
• Connect the smart switch to a 120
VAC, 60 Hz power source ONLY.
• Always use copper wire to install
the smart switch and follow all
applicable local and national
electrical codes.
Visit
www.legrand.us/radiant/smart-lighting/support
for support.
YOU MAY ALSO NEED:
Voltage tester, pliers, wire cutter, wire
stripper, electrical tape, fl ashlight, wiring
leads (included), and wire nuts (included)
SCAN TO WATCH THE
INSTALLATION VIDEO
Summary of Contents for radiant WWRL10WHCCV2
Page 1: ...Smart Switch Wi Fi...
