The Legrand PDU can work with certain Raritan or third-party products to provide diverse power solutions.
In This Chapter
Cascading with Raritan PX2-Based Products ...................................... 496
Connection to Raritan Serial Access Products..................................... 496
Power IQ Configuration ........................................................................ 497
dcTrack ................................................................................................. 497
Cascading with Raritan PX2-Based Products
You can cascade Legrand PDUs only. See
Cascading Multiple Legrand PDUs for Sharing Ethernet
Connectivity
(on page 32).
However, you can also cascade Legrand PDUs with Raritan's PX2-based products via USB or Ethernet ports.
These Raritan products include:
PX2 series power distribution units (PDUs)
PX3 series PDUs, including PX3-iX7
EMX asset management devices
PX3TS transfer switches, including PX3TS-iX7
Branch Circuit Monitor 1 (BCM1)
Branch Circuit Monitor 2 (BCM2), PMC and PMMC series, including:
BCM2-iX7
PMC-iX7
For detailed information on the cascading configuration and restrictions, refer to the
Cascading Guide
, which
is available from the Legrand PDU section of Raritan website's
Support page
Connection to Raritan Serial Access Products
Legrand PDU supports the integration with Raritan's serial access products - Dominion SX and Dominion SX
II.
You can access the CLI of the Legrand PDU via SX / SX II.
To only access the CLI of the Legrand PDU via SX / SX II, treat the Legrand PDU as a serial device by
connecting SX /SX II to the PDU's serial port labeled CONSOLE.
For more information on these Dominion serial access products, refer to:
SX or SX II User Guide on the
Support page
SX or SX II Online Help on the
Product Online Help page
Integration
