View Luxul’s Privacy policy at:
https://www.legrandav.com/legal/privacy_policy
The marking information is located at the bottom of the apparatus
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission in
writing from Luxul. The material in this document is subject to change without notice. Luxul reserves the
right to make changes to any product to improve reliability, function, or design. No license is granted,
either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2021 Legrand AV Inc. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo
mark and Simply Connected are all trademarks and or registered trademarks of Legrand AV Inc.
All other trademarks and registered trademarks are property of their respective holders.
Technical Support
P: 801-822-5450
Support chat: LegrandAV.com click ‘Live Chat’
(upper right) and select Luxul under ‘Brand’
Sales
P: 801-822-5450
I need to restore factory default settings?
To restore factory default settings to your AP, press and
hold the button labeled ‘RESET’ until the green system LED
starts flashing (5 seconds)
I need to restart my AP?
To restart your AP, press and quickly release the button
labeled ‘RESET’
I want to perform advanced configuration?
1. Open a web browser and go to 192.168.0.10 or the IP
address you specified during the setup process
2. Enter the login credentials you created during the
setup process
What if...
What do the LEDs on my AP indicate?
Indicator
State
Description
Green
System
LED
On
AP is properly connected to power supply
Blinking
AP is booting
Off
Power disconnected or AP is off, or LEDs
are turned off in the web interface
Blue
LEDs
The blue LEDs indicate the status of the wireless broadcast; one for
2.4GHz and the other for 5GHz
On
AP is broadcasting a wireless signal
Blinking
Indicates wireless activity
Off
AP is not broadcasting a signal, or the
LEDs are turned off in the web interface
