www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
3
INSTALLATION INSTRUCTIONS
LTSIU_F-5828_091118
To replace LED modules-
1. Open door, which is retained by stainless steel cables.
2. Loosen wing nuts and remove Wiring Cover. See Figure 2.
3. Remove reflectors and disconnect LED module leads. See Figure 4.
4. Remove screws securing LED module.
5. Secure new LED module by re-installing removed screws.
6. Attach leads and secure reflectors.
7. Re-install wiring cover and door.
Figure 4
Wiring Diagrams are provided on the inside of each fixture door.
