www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
1
INSTALLATION INSTRUCTIONS
LTSIU_F-5445_091118
Luminaires for Tunnel Applications
LUXTRAN
™
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions
should always be followed, including the following:
THIS PRODUCT MUST BE INSTALLED IN
ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR
WITH THE CONSTRUCTION AND OPERATION OF
THE PRODUCT AND THE HAZARDS INVOLVED.
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE
CODE D’INSTALLATION PERTINENT, PAR UNE
PERSONNE QUI CONNAÎT BIEN LE PRODUIT
ET SON FONCTIONNEMENT AINSI QUE LES
RISQUES INHÉRENTS. DISCONNECT POWER TO ALL
CIRCUITS BEFORE WIRING FIXTURE. INSTALL IN ACCORDANCE
WITH ALL NATIONAL, STATE, AND LOCAL CODES. DO NOT
CONNECT TO AN UNGROUNDED SUPPLY. READ ALL FIXTURE
MARKINGS AND LABELS TO ENSURE CORRECT INSTALLATION
OF FIXTURE. SUPPLEMENTAL INSTRUCTIONS MAY BE LOCATED
ON THE FIXTURE, IN ADDITION TO THIS INSTRUCTION SHEET,
REGARDING ORIENTATION, OR MOUNTING RESTRICTIONS.
SAVE THESE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
LTSIU SERIES
1. Secure fixture to wall or ceiling using user supplied hardware. Slots for 3/8 bolts are provided in the mounting
brackets. See Figure 1.
The LuxTran LTSIU series luminaires contains sensitive electronics. Take care to avoid damage by improper handling or
static electricity discharge (ESD). Either type of damage could render the system inoperable or cause latent failure.
NOTE: If the fixture has directional optics, note the label indicating the direction of light and install appropriately.
Figure 1
.94
.44
10.0
25.5
9.75
Figure 1a
.91
.41
4.00
25.37
5.95
20
°
20
°
Figure 1b
