Page
14
301 Fulling Mill Road, Suite G
©Copyright 2012 by Legrand,
Middletown, PA 17057
Inc All Rights Reserved.
(800)-321-2343
www.onqlegrand.com
3)
Find the SSID of the Access Point / Router or WISP, and click
Connect
in the corresponding
row. You will then return to the previous page.
4)
Select the security mode and enter the password that is the same as on your router or
access point in Figure 3-13.
5)
Click
Next
, you will then come to
Network Settings
page for further configuration.
D.
If you chose
Bridge with AP
operation mode, the
Wireless Settings
page will be shown as in
Figure 3-15 Wireless Settings
– Bridge with AP mode
1)
Click
Survey
, then the window displaying a list of available SSIDs will appear as in Figure
2)
Find the SSID of the Access Point / Router or WISP, and click
Connect
in the corresponding
row. You will then return to the page shown in Figure 3-15.
3)
Select the security mode and enter the password that is the same as on your router or
access point.
4)
Click
Next
in Figure 3-15, then the page below (Figure 3-16) will appear. You can name the
bridge AP in
Local Wireless Name
. With
Use the same security settings for the local
wireless network as the root AP
selected, the security settings of the wireless network will
be the same with the root AP.
