Installation Instructions
PACFCB
7
10. Select correct screws, nesting spacers (if necessary) and
universal washers (if required) from the hardware bag (EA-
EM) and attach brackets to back of screen. (See Figure 5)
IMPORTANT ! :
The M8 screws do
NOT
require a
washer. Use the universal washer (EMB) only with M4,
M5 and M6 screws.
NOTE:
The nesting spacers (EMA) may be used separately, or
put two together in different configurations to create
different size spacers. (See Figure 4)
Figure 4
11. If the display has a recessed mounting surface, protrusions
or a power box, a spacer and longer mounting hardware
must be placed between the display and vertical mounting
bracket (ER). (See Figure 5)
12. Repeat Steps 5 through 8 for Right side vertical mounting
bracket using the same hole locations to align brackets
horizontally.
(Single)
(Nested)
(Stacked)
0.375
[9.5]
0.563
[14.3]
0.750
[19.1]
Figure 5
10
8
(ER) x 2
(EMA) x 4
(EA through EL)
x 4
(EMB) x 4
(ER)