Installation Instructions
OLCM1U
9
Attaching Display to Ceiling Mount
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located within the mounting system of the
OLCM1U mounts does not exceed 250 lbs (113.4 kg).
1.
Ensure that the latch mechanisms on interface brackets (L)
are already lowered. (See Figure 10)
2.
While supporting both sides of display, lower display onto
ceiling mount, hooking top of interface brackets onto front of
ceiling mount. (See Figure 12)
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! The display MUST
be centered on the ceiling mount.
3.
Raise the latch mechanism on both interface brackets to
lock bracket in place. (See Figure 12)
Figure 12
4.
Fasten brackets against ceiling mount extrusion using two
#10-24 x 1/2" socket head cap screws (M). (See Figure 13)
5.
Repeat for other interface bracket.
Figure 13
2
3
Latch
mechanism
(wind shield hidden for clarity)
4
(M) x 2
(wind shield hidden for clarity)
