FCA850
Installation Instructions
6
2.
Slide rail bushings (G) onto extension bars (F). (See Figure
4)
3.
Install two 5/16-18 x 1/2" button head cap screws (C) into
ends of extension bars (F) to keep bushings (G) from sliding
off bars. (See Figure 4)
Figure 4
4.
Insert ends of extension bars (F) into open endings of
mounting system. (See Figure 5)
5.
Tighten bushings (G) to secure extension bars (F) to
mounting system at desired location. (See Figure 5)
Figure 5
Camera Mounting
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all equipment and accessories mounted on the FCA850 does
not exceed 5 lbs (2.27 kg).
NOTE:
Mounting options will vary depending on the type of
camera being mounted.
1.
Install 1/4-20 x 1/4" Phillips pan machine screw (D) through
holes on shelf and into hole on bottom of camera. (See
Figure 6)
NOTE:
Camera can be secured to mount by threading a tie
through outside slots on camera mount and around the
camera.
NOTE:
It is also acceptable to mount the camera directly to the
shelf without any screws or ties.
Figure 6
Adjustments
Extension Length Adjustment
1.
Loosen two bushings (G) connecting extension bars (F) to
mount. (See Figure 7)
2.
Adjust arm to desired length. (See Figure 7)
3.
Tighten two bushings (G) until connection to mount is
secure. (See Figure 7)
Figure 7
2
2
(C) x 2
3
(F) x 2
(G) x 2
camera (example)
(D)
1
1
2
3
(G) x 2
(F) x 2
5
(G) x 2
4
4
