background image

 FCA520

Installation Instructions

2

DISCLAIMER

Legrand 

|

 AV and its affiliated corporations and subsidiaries 

(collectively “Legrand 

|

 AV”), intend to make this manual 

accurate and complete. However, Legrand 

|

 AV makes no claim 

that the information contained herein covers all details, 
conditions or variations, nor does it provide for every possible 
contingency in connection with the installation or use of this 
product. The information contained in this document is subject 
to change without notice or obligation of any kind. Legrand 

|

 AV 

makes no representation of warranty, expressed or implied, 
regarding the information contained herein. Legrand 

|

 AV 

assumes no responsibility for accuracy, completeness or 
sufficiency of the information contained in this document.

DEFINITIONS

MOUNTING SYSTEM: 

A MOUNTING SYSTEM is the 

primary Chief product to which an accessory and/or component 

is attached.

ACCESSORY: 

AN ACCESSORY is the secondary Chief 

product which is attached to a primary Chief product, and may 

have a component attached or setting on it.

COMPONENT:

 

A COMPONENT is an audiovisual item 

designed to be attached or resting on an accessory or mounting 
system such as a video camera, CPU, screen, display, 
projector, etc.

 IMPORTANT SAFETY INSTRUCTIONS

WARNING:  

A WARNING alerts you to the possibility of 

serious injury or death if you do not follow the instructions.

CAUTION:  

A CAUTION alerts you to the possibility of 

damage or destruction of equipment if you do not follow the 
corresponding instructions.

WARNING:  

Failure to read, thoroughly understand, and 

follow all instructions can result in serious personal injury, 
damage to equipment, or voiding of factory warranty! It is the 
installer’s responsibility to make sure all accessories are 
properly assembled and installed using the instructions 
provided.

WARNING:  

Exceeding the weight capacity can result in 

serious personal injury or damage to equipment! It is the 
installer’s responsibility to make sure the combined weight of 
all components placed on the FCA520 does not exceed 10 lbs 
(13.6 kg). 

WARNING:  

Use this accessory only for its intended use as 

described in these instructions. Do not use attachments not 
recommended by the manufacturer.

WARNING:  

Never operate this accessory if it is damaged. 

Return the mounting system to a service center for 
examination and repair.

WARNING:  

Do not use this product outdoors.

WARNING:  

RISK OF INJURY TO PERSONS! Do not use 

this accessory to support video equipment such as 
televisions or computer monitors.

--SAVE THESE INSTRUCTIONS--

Summary of Contents for CHIEF FCA520









Reviews: