Installation Instructions
TA210K
7
Camera/Component Installation
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all equipment and accessories mounted on the TA210K
brackets does not exceed 10 lbs (4.54 kg) per bracket.
1.
Install two #10-32 x 38" Phillips pan machine screws (J)
through holes on camera bracket (C) and into holes on
sides of camera. (See Figure 7)
Figure 7
Adjustments
Height Adjustment
1.
Loosen three 1/4-20 x 5/8" button head cap screws (F)
holding extension bracket (B) or camera bracket (C) to
attachment bracket (A). (See Figure 8)
2.
Adjust height of shelf (C) as desired.
3.
Tighten three 1/4-20 x 5/8" button head cap screws (F)
holding extension bracket (B) or camera bracket (C) to
attachment bracket (A). (See Figure 8)
Figure 8
camera (not included)
1
(J)
2
1
3
with extension bracket
without extension bracket
2
