Install and power the projector to generate the image
profile to match to the screen (make sure to adjust the
resolution settings and aspect ratio of the projector to
desired settings)
5
Secure extension column by one of the following
methods (See Figure 25):
4
NOTE:
Security spinner (F) is designed to spin, even when
screw is tight.
A. Install one 10-24 x 1/4" Phillips pan head screw (D)
into extension column support, tightening firmly
against column.
B. OPTIONAL: Install one 10-24 x 1/4" button head
security screw (E) through security spinner (F) into
column support, tightening firmly against column.
Move the mount plate as required to adjust the image
to the target screen (note that the CMS491C/
CMS492C enclosure may be moved within the tile to
aid in location of the mount plate).
6
Tighten the four screws on both ends of the mount plate,
and the four screws on the sides of the CMS492C
projector mount plate to secure the projector position
within the enclosure.
7
Figure 25
(D)
B
A
(E)
(F)
Installation Instructions
CMS491/492
1 2
