Transmitter
Rear Panel
(us)
Transmitter
2
9
INPUT Button
Short press:
Switch input source.
10 DISPLAY Button
Short press:
Turn display on.
Long press:
3 seconds to turn off display.
11 AUDIO IN
Connect one-way analog audio pass through from wall-plate
transmitter to receiver.
12 USB-B Host Port
Supports USB 2.0 pass through over HDBT.
13 USB Micro-B IN
Supports firmware updates or controlling the transmitter
through API commands.
R
EAR
P
ANEL
D
ESCRIPTION
14 HDBT OUT
Connect to the receiver via a Cat 5e/6/6a/7 cable.
15 Power
Pins 12V and G are used for local DC 12V input.
HDMI® H USB
-
C®, 3.5mm, and USB
-
B to A over Cat Extender Wall Plate
Transmitter to Box Receiver
-
4K 60Hz
(us)
Product Overview
Front Panel
①
②
④
⑦
⑧
③
⑤
⑨
⑫
⑥
⑩
⑪
⑮
⑭
F
RONT
P
ANEL
D
ESCRIPTION
1 HDMI IN
Connect to an HDMI source using an HDMI cable.
2 USB-C IN
Connect to a USB-C source using a USB-C cable.
3 Reset Button
Restore factory defaults. When the transmitter is powered on,
use a pointed stylus to hold down button for five or more
seconds and then release.
4/5 HDMI / USB-C LED
LED On:
Only one light will be on at a time, indicating which
input is selected.
6 HDCP LED
On:
HDCP protected content is being transmitted.
Blinking:
Non-HDCP protected content is being transmitted.
Off:
No content is being transmitted.
7 Link LED
On:
HDBT link is normal.
Off/Blinking:
No HDBT link or link error.
8 Power LED
On:
Power is applied to the device.
Off:
No power is applied to the device.
⑬
Summary of Contents for C2G31011
Page 2: ......
