LEGRAND C2G C2G30013, Manual, Page: 7 / 24

RS232 Pass - through
RS232 port can be used for bi - directional RS232 signal pass - through between the transmitter and receiver.
Steps to set up for RS232 pass - through:
1. Connect a RS232 Master (or Slave) Device to RS232 port of the transmitter with a RS232 cable.
2. Connect a RS232 Slave (or Master) Device to RS232 port of the receiver with a RS232 cable.
3. Connect HDBT OUT of the transmitter to HDBT IN of the receiver with a Cat 5e/6/6a/7 cable.
When all is set, RS232 signal can be passed through bi - directionally between two RS232 devices.
Important Safety Information
Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this
manual for power level of the unit.
Liquid: If this unit or it ’ s corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt
to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product.
In case of a storm, it is recommended that you unplug this device from the outlet.
Avoid placing this product next to objects that produce heat such as portable heaters, space heaters, or heating ducts.
THERE ARE NO USER SERVICEABLE PARTS. Do not attempt to open this product and expose the internal circuitry. If you feel that
the product is defective, unplug the unit and refer to the warranty information section of this manual.
C2G Warranty
At C2G we want you to be totally confident in your purchase. That is why we offer a warranty on this device. If you experience
problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device.
To request a Return Merchandise Authorization (RMA) number, contact customer service at 800 - 293 - 4970 or www.c2g.com.
5
(us)
HDMI® H 3.5mm, USB - A to B, and RS232 over Cat Extender
Box Transmitter to Box Receiver - 4K 60Hz