F
EATURES
•
One
-
way Power over HDBaseT (PoH), so that the wall plate can be powered by receiver.
•
Extend 4Kx2K at 60Hz (4:2:0) up to 130ft and 1080p at 60Hz up to 230ft with Cat 6a/7 cable
•
Extend 4Kx2K at 60Hz (4:2:0) up to 115ft and 1080p at 60Hz up to 200ft with Cat 5e/6 cable
•
HDMI 1.4 with 4K at 60Hz, 4:2:0, 8bit and HDCP 2.2 compliant
•
One
-
way analog audio pass through from wall
-
plate transmitter to receiver.
•
Two buttons on the panel, one for input switching and the other for turn display on/off (CEC).
•
Supports USB 2.0 pass through over HDBT, connecting up to 4 USB devices to the receiver.
•
Supports CEC switch command sent by wall
-
plate.
•
Supports firmware updates through the USB Micro
-
B port on the Transmitter.
M
OUNTING
B
RACKET
I
NSTALLATION
Note:
Before installation, please ensure the unit is disconnected from the power source.
1.
Choose a suitable location for mounting bracket installation.
2.
Position and install the mounting brackets of the receiver with the two mounting screws
provided.
3.
Mount and secure the receiver to a surface or a suitable location respectively with mounting
screws.
C
ABLE
I
NSTALLATION
Note:
Before installing cables, please ensure the unit is disconnected from the power source.
1.
Connect HDMI IN:
Connect an HDMI source device (e.g. Laptop, Blu
-
ray player, etc.) to HDMI IN of the transmitter using a high
-
quality HDMI
cable.
2.
Connect USB
-
C IN:
Connect a USB
-
C source device (e.g. Laptop, tablet, etc.) to USB
-
C IN of the transmitter using a USB
-
C cable.
3.
Connect USB
-
B HOST PORT:
Using the included USB
-
A to B Cable, connect the USB
-
A end to source device (e.g. Laptop, etc.) and connect the
USB
-
B end to the USB HOST PORT on the wall plate transmitter.
4.
Connect HDBT:
Connect HDBT Out of the transmitter to the HDBT IN of the receiver using a Cat 5e/6/6a cable.
5.
Connect HDMI OUT:
Connect an HDMI display device (e.g. TV, monitor, projector, LCD/LED display, etc.) to HDMI OUT of the receiver.
6.
Connect AUDIO OUT:
Connect an amplifier to the AUDIO OUT of the receiver using a 3.5mm audio cable.
7.
Connect USB DEVICES:
Connect up to four USB devices (e.g. keyboard, mouse, USB camera, etc.) to the USB DEVICE ports of the receiver.
8.
Power on all attached devices.
4
P
ACKAGE
C
ONTENTS
•
1 x Wall Plate Transmitter with screws
•
1 x Wall Plate Plastic Panel (2
-
gang US
with screws)
•
1 x Receiver
•
1 x USB
-
A to B Cable
•
1 x 12V 2A Power Adapter
•
2 x Mounting Bracket (with screws)
•
1 x Phoenix Male Connector (3.5mm, 3 Pins)
•
1 x Phoenix Male Connector (3.5mm, 4
-
Pins)
•
1 x Manual
(
US
)
HDMI® HDB
ASE
T + USB
-
C®, 3.5
MM
,
AND
USB
-
A
TO
B
OVER
C
AT
E
XTENDER
W
ALL
P
LATE
T
RANS-
MITTER
TO
B
OX
R
ECEIVER
-
4K 60H
Z
(
US
)
Summary of Contents for C2G 30011
Page 2: ......
