LEGRAND BTicino MyHome HOMETOUCH 3488, Installation Manual, Page: 70 / 72

HOMETOUCH
Installation Manual
70
If the MyHOMEServer1 IP address is not known, this can be found using the MyHOME_Up App.
To use the MyHOME_Up functions see the manual available from:
www.homesystems-legrandgroup.com
1. Open the MyHOME_Up App
2. Access the system through an installer connection
3. Touch to open the setting page
4. Touch to display the MyHOMEServer1 network parameters
System 1
Access with PIN CODE
MyHOME_Up
powered by ISAAC
I1
Ground floor
Kitchen
Living room
Favourites Home Scenarios Security Other
1
2
3
System
Obtain general information and modify...
Email
Set the parameters for email sending
Date and time
Set the date and time of the gateway
Disconnect
InstallerCode
System reset
Manage the system reset
Weather
Set the city to be monitored
Geolocation
Set the geographic position
Network
Set the network parameters
Security system
Connect security system to MyHome_Up
Other
Favourites Home Scenarios Security Other
System
Obtain general information and modify...
Email
Set the parameters for email sending
Date and time
Set the date and time of the gateway
Disconnect
InstallerCode
System reset
Manage the system reset
Weather
Set the city to be monitored
Geolocation
Set the geographic position
Network
Set the network parameters
Security system
Collegare il Security system a My...
Other
Favourites Home Scenarios Security Other
Address IP 192.168.0.158
Submask 255.255.255.0
Gateway Enter the gateway
Primary DNS 192.168.0.111
Primary DNS
Enter the DNS
Verified connection
Network Cancel Save
DHCP
4