3
23/03/2021
F411U2
ST-00000893-
2. Automation control
2.1 Addressing
Address type
Virtual configuration (MyHOME_Suite)
Physical configuration
Point-to-point
Room
0-10
A=1-9
Lighting point
0-15
PL1, PL2=1-9
Group
Group 1 - Group 10: 0-255
G=0-9
2.2 Mode
Virtual configuration (MyHOME_Suite)
Physical configuration
Function
Parameter / setting
Master Actuator
Master
M=0
Actuator as Slave. Receives a control sent by a Master actuator
which has the same address
Slave
M=SLA
Button (On monostable) ignores Room and General controls
Master PUL
M=PUL
Timed stop. The actuator switches off after the set time has
elapsed.
Operating mode, only if PL1=PL2.
1-60 seconds,
2-10 minutes,
∞
M=0
1 minute
M=1
2 minutes
M=2
5 minutes
M=3
10 minutes
M=4
infinite or until next command
M=5
20 sec.
M=6
10 sec.
M=7
5 sec.
M=8
15 sec.
M=9
30 sec.
To use "Actuator as Slave with PUL function" and to adjust the "Delay OFF", the "Load
type" (Actuator, Blinds, Curtains, Gate, Garage door) use the MyHOME_Suite virtual
configuration.
NOTE:
If PL1=PL2, the 2 relays are interblocked
2 Relay actuator 10A
EN
