Cat. No(s): 0 487 71/81
FL4648/48W/58
1/3
RFID keycard reader
BUS/SCS
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex
Tel: +33(0)5 55 06 87 87 Fax: +33(0)5 55 06 88 88
www.legrand.com
Technical data sheet: S000101015EN-1
Updated: 26/03/2018
Created: 20/03/2018
This is an RFID keycard reader (13.56 MHz) located at the entrance to the
room which can, by inserting an RFID keycard in the appropriate slot:
- indicate someone is in the room
- trigger a “welcome” scenario
And by removing it:
- indicate no one is in the room
- trigger a “goodbye” scenario
It indicates and can be used to activate the housekeeping information:
- Do Not Disturb
- Make Up Room
- Extra service, for example picking up laundry (only available on
configured version)
The card position is indicated by arrows (illuminated flashing path).
It has a proximity sensor which can be disabled by configuration: when
the device detects an approach, it switches from standby state to active
state. The LED brightness level (on standby or active) can also be set by
configuration.
It can be configured using the MyHOME_Suite software, which can be
downloaded from the website www.homesystems-legrandgroup.com.
It can also be used for IP installations which include controller
0 484 08/12, and can be configured with the Hotel Room Configuration
Software available on the website www.legrandoc.com.
1. DESCRIPTION
Key
1. MUR indicator (green LED on = MAKE UP ROOM)
2. DND indicator (red LED on = DO NOT DISTURB)
3. Keycard slot indicator
4. BUS/SCS plug-in connector
Front view
Rear view
5
4
CONTENTS
Page
1. Description ....................................................................1
2. Technical characteristics...........................................1
3. Standards, certifications and markings ..............1
4. Dimensions ...................................................................1
5. Wiring ..............................................................................2
6. Installation .....................................................................2
7. Configured version Cat. No. 0 487 81/FL4658 ... 3
2. TECHNICAL CHARACTERISTICS
BUS/SCS power supply:
18 - 27 VDC
Standby consumption:
12 mA
On-load consumption:
25 mA
RFID frequency:
13.56 Mhz
Operating temperature:
0°C to +40°C
Storage temperature:
-20°C to +70°C
Protection index:
IP 20, IK 04
Plate and surround colour:
Black Cat. No. 0 487 71/FL4648
or white Cat. No. FL4648W
3. STANDARDS, CERTIFICATIONS AND MARKINGS
EN 60669-2-5
CE marked
4. DIMENSIONS
129
49
18.1
93
1
2
4
3
