14
PROBLEM
CAUSE
SOLUTION
The Learn indicator light comes on for
5 seconds.
Learning is impossible.
Install compatible products.
The Learn indicator light comes on for
10 seconds.
The number of memorised transmitters
is greater than 32.
Delete unused scenarios.
The Learn indicator light no longer
blinks during learning.
The learning mode closes after 10
minutes (with no action).
Start learning again.
During learning, pressing the
programmed control key does not make
the Learn indicator light blink rapidly.
After pressing the Learn button once,
function key learning must be done
within the following minute.
Start learning again.
When the scenario is saved, the Learn
indicator lights of certain receivers do
not go out.
Poor communication between prod-
ucts.produits.
Reduce the distance between the
transmitter and the receivers(s), then
start learning again or add a repeater.
Operation
(cont.)
To make sure that the repeater learns a control correctly, the blinking of the installation LED is noted for each RF message.
