10
10
Description
Operation
The dimmer switch:
- Using its ON and OFF keys it can simultaneously control a set of products (actors) that have been associated with it
during the learn phase
(1)
. It is then the
Leader
of the scenario
(2)
.
- Can be controlled by other Leader products. It is then an
Actor
.
As Leader:
The dimmer switch can control:
- The lighting points that are directly connected to the open phase terminal, using the ON, OFF, + and - keys.
- The lighting points associated with it (the actors) using the ON and OFF keys.
As Actor:
The remote control dimmer can participate in 16 different scenarios, executing the commands from the other Leaders.
Locally:
The dimmer switch can control:
- The lighting points that are directly connected to the open phase terminal, using the ON, OFF, + and - keys.
When the remote control dimmer is used in local control, it is possible to record a default light level.
Setting the light level of the ON button (excluding learning procedure) :
- Set the level using the + and - buttons
- Press the + and ON buttons at the same time, for 5 seconds
- The load will extinguish and light up again at the ON level
The ON level is now saved.
To record a light level during the learn phase, step 2 of the “learn scenario” becomes:
(1) Learn phase: Operation to associate products so that they can be controlled simultaneously from a central point.
This association is carried out by applying
the learn scenario
procedure on page 11.
(2) Scenario: Corresponds to the set of products (actors) that are associated with a command key.
Press LEARN
Press the + or - command key
to set the required
lighting level
Press the ON command key
which must be associated
with the leader
Command keys
LEARN indicator lamp
ID number
LEARN key
Command keys
Communication media
PLC => Mains-borne signalling
IR => Infrared
Infrared cell
