Safety instructions
This product should be installed preferably by a qualified electrician.
Incorrect installation and use can entail risk of electric shock or fire. Before carrying out the installation,
read the instructions and take account of the product’s specific mounting location. Do not open up the
device.
All Legrand products must be exclusively opened and repaired by personnel trained and approved by
LEGRAND. Any unauthorised opening or repair completely cancels all liabilities and the rights to
replacement and guarantees. Only use genuine accessories.
NOTE: Wiring both speakers identically as the above instruction states will yield speakers that are
“in phase”. If one speaker is wired opposite of the other, the speakers will be “out of phase”
with one another. If the speakers are “out of phase” the sound might appear smeared (canned) and
a significant loss of bass might be noticeable due to phase cancellation. Make sure every installed
speaker is correctly phased.
Figure 4
F. Once the speakers are wired correctly, attach them to the bracket with the large round retainers provided
with the speakers (see
Figure 5
). The retainers allow the speakers to be rotated in the bracket to direct the
sound output.
Figure 5
8
î Speaker (2.1 CuFt)
Blockin
g
Distance
16” on Center, 2x4
71.50”
16” on Center, 2x6
16” on Center, 2x8
16” on Center, 2x10
16” on Center, 2x12
24” on Center, 2x4
24” on Center, 2x6
45.50”
34.50”
27.00”
22.25”
46.00”
29.50”
6.5
”
Speaker (0.7 CuFt)
Blockin
g
Distance
16” on Center, 2x4
24.00”
16” on Center, 2x6
16” on Center, 2x8
16” on Center, 2x10
16” on Center, 2x12
24” on Center, 2x4
24” on Center, 2x6
15.25”
11.50”
9.00”
7.50”
15.50”
10.00”
