LEGRAND 4 306 31, User Manual

Page: 43 / 86

43 43
Refer to the following sheet for detailed information
Parameter Function
Ethernet Select the network card first.
Port 1 is the ethernet port.
Port 2 is the wireless port (if available).
DHCP Dynamically get IP address. Get the device IP adress from the server if this
function is enabled.
Device Name Device ID in the network.
TCP Port Default value is 37777.
HTTP Port Default value is 80.
UDP Port Default value is 37778.
DNS Manually set IP address of DNS.
You need to enable this function if you are inputting the domain name in
some items. Otherwise the system can not parse the domain name.
Alternative
DNS
Max Connec-
tion Simultaneously, network users max amount. The value ranges from 1 to 10.
Network
transmission
QoS Set the priority between fluency and video quality or self-adaptive.
System can automatically adjust the bit stream or lower the resolution
according to the network bandwidth.
Advance interface
Parameter Function
Remote
Host Multiple
cast
group - Set MULTICAST address and port.
- Enable function.
- Current series IPC does not support this function right now.
PPPOE - Input the PPPoE user name and password you get from the IPS
(internet service provider) and enable PPPoE function. Save current
setup and reboot the device to get the setup activated.
- Device connects to the internet via PPPoE after reboot. Get the IP
address in the WAN from the IP address column.