11
N041852/01
Replacing a cap of the pen station (cat. no. 3
8
5 41)
Open the pen station using
the Pen station Open/Close key.
Orange
light
Use the special tool
to remove the cap.
A
B
Insert the new cap (clean)
in the station up to the limit
marked on the aluminium tube.
A
B
Adjust its position with the tool:
the tool handle should be parallel to
the plotter bed and the notch
on the cap should be centred.
Operation (continued)
Start the printing from
the Logicab™2 software
Logica
b™2
IMPORTANT:
If out of use for an extended period, you must remove the pen
from the pen station, recap it, and store it in a cool place away
from sunlight.
CAUTION:
You should allow a moment of drying time
before using the printed markers.
DEPA
RT
DEPA
RT
ARR
ET
AR
RET
MEM
O 1
ME
MO
1
