3
Introduction
NOTE:
Before installation, please inspect the contents. Be sure that nothing inside the package is damaged.
Please keep the original package in a safe place for future use.
Unpacking and Inspection
Unpack your products and inspect the contents. The contents should include the following supplied
components and hardware.
(4x) Fixing Stud
A
Left and Right Rail Slider
B
(12x) M6 Rack
Screws
C
(6x) M6 Cage Nut
D
Installing the Mounting Brackets
CAUTION
: Do not use the mounting brackets to lift the unit. Use the mounting brackets only for
securing the unit to the rack.
ATTENTION
: N'utilisez pas les supports de montage pour soulever l'appareil. Utilisez les supports de
montage uniquement pour fixer l'unité au rack.
Step 1
Use mounting brackets and screws (provided in UPS packaging) to assemble the ears onto the sides of your
UPS as shown.
Installing 2U Rail Sliders Using Cage Nuts and Screws
Step 1
Firmly insert fixing studs (A) on top set of holes on the rail sliders (B) as shown. Pull apart the ends of the rail
sliders (B) to meet the depth of the rack chassis and force fixing studs (A) into the corresponding holes on
the rack chassis columns. The rail sliders align with the inside of the rack chassis columns.
A
A
A
A
B
B
FRONT
REAR