8/15
CONTENTS
10’’ PDUs
19’’ PDUs
Zero-U PDUs
Data sheet: S000093176EN-05
Updated: 29/03/2018
Created: 25/10/2016
Cat. Nos: 6 468 00/01/05/06/07/09/10/11/12/13/14/15/18/19/
20/21/22/23/24/30/31/32/33/35/36/40/41/42/43/44/
45/50/51/52/53/54/56/57/59/60/61/65/70/75/90/92/94/
95/97/98/99
2.2 Customized products
Legrand PDUs can be delivered with custom configurations to meet
specific customer requirements. Contact your local sales representative
to discuss your requirements.
Example:
19’’ PDU 1U with 2 x 2P+E French/Belgian standard outlets, 1 C19 socket
and 6 C13 sockets.
Supplied with 3 m cable and C20 plug
Example:
Zero-U PDU with 12 2P+E French/Belgian standard outlets.
Red strips for PDU identification purposes. Supplied with rotative
cable entry, 4.5 m cable and IEC 60309 16 A plug
CONFIGURATION EXAMPLES
3 m
4.5 m
3. FUNCTIONS
3.1 Outlets
Legrand PDUs can be equipped with outlets of different standards.
C13 with cord locking system
2P+E 10 A
Outlet recess at 90° angle
Conforms to standard IEC 60320-2-2
C19 with cord locking system
2P+E 16 A
Socket recess at 90° angle
Conforms to standard IEC 60320-2-2
Cord locking system on C13/C19 sockets
The cord is locked mechanically into the outlet to prevent any
unintended disconnection (caused by maintenance, vibrations, etc.).
Pull-out force > 100 N
This universal solution is compatible with all standard cords available on
the market.
French-Belgian
2P+E 16 A
Terminals equipped with protective shutters
Outlet recess at 55° angle
Conforms to standard IEC 60320-2-2
German
2P+E 16 A
Terminals equipped with protective shutters
Outlet recess at 55° angle
Conforms to standard IEC 60320-2-2
UK
2P+E 13 A
Terminals equipped with protective shutters
Outlet recess at 90° angle
Conforms to standard IEC 60320-2-2
3.2 LED switch
The LED switch is used to control the PDU power supply.
A white LED is lit when the PDU sockets are supplied
with power.
16 A switch
Transparent switch
3.3 Power indicator
A white LED on the power indicator shows that the product is supplied
with power.
3.4 Ammeter
The ammeter is used to measure consumption for enhanced installation
management.
Operation: 230 VAC 50Hz
Measured value: current (0 to 32 A)
Operates by measuring the current using a shunt
3-digit display "XX.X"
Rotatable display for legible readout regardless of whether the PDU is
mounted vertically or horizontally
mA
p
mA
p
B
A
Amp
Amp
