5/11
Technical data sheet: S000094312EN-1
Updated:
Created: 20/09/2017
Cat. No(s): 0 026 54
KNX modular dimmer 2 x 300 W
5. OPERATION
(continued)
5.4.1 Channel configuration
After scanning the device: select “see details” to access the settings.
Both channels have the same settings:
• Switch-on time
• Dimming time
• Switch-off time
• Change of level time
• Use timer (yes/no)
• Use scenes (yes/no)
• On energisation (Status memory/Always on/Always off)
5.4.2 Load settings
This function is used to modify the following parameters:
• Load detection (Forced or Automatic)
• Type of switching (Trailing or Leading)
• Load type: - Incandescent (300 W max.)
- Transformer (300 VA max.)
- Compact fluorescent (100 W max.)
- LED (75 W max.)
- LED with noise reduction (40 W max.)
• Maximum level (20% to 100%)
• Minimum level (2% to 85%)
5.4.3 Scene settings
This is used to configure the different scenes from A to H (Scene
number, level, etc):
• Use scene A…H (yes/no)
• Use backup (yes/no)
• Scene number (select number)
• Scene level (20% to 85%)
• Time to reach the level
6. STANDARDS
EN 301 489-1 V1.9.1 (09/2011)
EN 301 489-3 V1.9.2 (08/2013)
IEC 60669-2-5 (10/2013)
NF/EN 50428( 09/2005)+ A1 (10/2007)+A2 (09/2009)
NF/EN 62369-1 (08/2009)
EN 300 330-1 V1.8.1 (03/2015)
EN 300 330-2 V1.6.1 (03/2015)
SIMPLIFIED DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that radio equipment Cat. No. 0 026 54
conforms to Directive 2014/53/EU.
The full text of the EU declaration of conformity
can be found at the following web address:
Marking: CE, KNX, NFC