manualshive.com logo in svg

Legola 9512, Assembly Instructions, Page: 4 / 4

Share
Download
Legola 9512 Assembly Instructions Download Page 4

 

           

For Customer Service Call:                                                               Page 

4 

of 4

 

 

              (800) 433-6614 

                                                                          www.viaseating.com 

6.

 

Using the short 16mm 

screws (BAG C ) start 

all 4 screws BEFORE 

tightening any of them 

fully.  

 

7.

 

Tighten the screws 

fully in the sequence 

1-4 shown at right. 

    

CAUTION: Using screws 

longer than 16mm WILL 

damage the Work Surface! 

 

 

 

 

 

Legola Trapezoidal Shelf-9512 

(shown with 40” Curved Panel) 

 

Summary of Contents for 9512

Page 1: ...14 www viaseating com 9512 Trapezoidal Work Surface Assembly Instructions TRAPEZOIDAL SURFACE 1x BAG A 4x Table Bracket BAG B 4x M6 X 20mm BAG C 4x M6 x 16mm BAG D TOOLS INCLUDED 1x 4mm Allen Wrench 1x 1x 1x 1x Button Support Bracket Button Nut Plug ...

Page 2: ...t all panels using metal brackets sold separately as shown see General Panel Assembly Instructions 2 Connect Table Brackets BAG A to curved panels using the long 20mm screws BAG B with allen wrench included NOTE Some buttons may come fully assembled 3 Assemble the Button as shown ...

Page 3: ... viaseating com 4 Slide Button with Support Bracket attached into Panel slots with FLUSH SIDE FACING UP 5 Slide the Trapezoidal Shelf down along the curved panel allowing it to rest on top of the Table Brackets and inside the Button Support Bracket groove ...

Page 4: ...Using the short 16mm screws BAG C start all 4 screws BEFORE tightening any of them fully 7 Tighten the screws fully in the sequence 1 4 shown at right CAUTION Using screws longer than 16mm WILL damage the Work Surface Legola Trapezoidal Shelf 9512 shown with 40 Curved Panel ...

Reviews:

No comments