Pet (Our Little Friend)
Frogs
Zoologist
Bee
These models are placed LOOSE on their marks as shown…(continued on next page)
BIOMIMICRY WALL AND GREEN GECKO:
The Biomimicry Wall’s
feet are spaced slightly wide. Center them as close to their marks as
possible, and keep them parallel. Press the Green Gecko onto its
holder at the center of its belly as shown.
PANDA OBSERVATION
AND RETURN:
Starts with sliding
section closed (counter-clockwise).
ANIMAL CONSERVATION:
This Model is secured with Dual Lock, but not on “X” marks. Instead,
you
find the correct
north-south location. Place the model between its red marks on the mat. Then center it over your Table’s north border
wall
and
a selection of “Dummy” wall. Next, make small pencil marks to show exactly where the model’s feet are.
After these location steps, apply Dual Lock – two pair under each foot. When loading an animal in your tray, push the
animal north, and center it east/west. Finally, rest the red axle on its stopper.
MILKING AUTOMATION:
Red lever is aligned over its mark. Release-cow is
pulled all the way out. Dispenser ramps are loaded with Milk and Manure (a
type of feces) as shown.
RAMP:
Tilt is all the way down at
west side.
BEEHIVE:
Honey is loaded.
REFRIGERATOR AND FOOD:
Refrigerator is loaded with all 8 Food
inside, in random order. Door is closed.
*(Reindeer shown.
You might load a
different animal.
See MISSIONS
for full details.)