6
ASSEMBLY
STEP 2
Cut and remove (2) WHITE zip-ties at head end of base (one on each side)
(FIGURE 1).
Note: DO NOT cut red zip-ties yet.
STEP 3
Plug electrical power cord into power brick. Plug
brick power cord into base motor cable. Secure
connection using cable latch (FIGURE 2).
Note: Align
pins before inserting plugs
.
Plug electrical power cord into power outlet. Note: An
electrical surge protection device is recommended
(not included).
POWER CORDS MUST NOT INTERFERE WITH
ANY ADJUSTABLE BASE MECHANISMS.
DO NOT WEAVE CORDS THROUGH BASE
STRUCTURE.
WARNING
!
INSERT
ELECTRICAL
POWER CORD
HERE
POWER BRICK
BRICK POWER CORD
(ATTACH TO BASE
MOTOR CABLE)
FIGURE 2
MOTOR
CABLE
CABLE
LATCH
POWER BRICK
CORD
FIGURE 1
CUT AND REMOVE
WHITE ZIP-TIES
