background image

REACH

 

     

User Manual

Page 8

Section 2: Warnings

Read this Manual Completely Before Using

All caregivers and/or attendants must read this user manual prior to operating the Reach chair.  
Familiarize yourself with the handling and functions of the product prior to actual use.  If there is 
any information in this manual that you do not understand, please contact your authorized Leggero 
provider for assistance.

Failure to follow instructions or comply with warnings within this manual could result in 
personal injury and/or damage to the Reach chair, potentially voiding the warranty. 

WARNING!
The word “WARNING” or this symbol indicate practices that are unsafe or 
dangerous and could result in serious injury to the occupant and/or caregiver.

Symbols Used on Product Warning Labels and in User Manual

WARNING!  READ INSTRUCTION MANUAL

Choose The Right Chair & Safety Options

In the mobility industry, there are several options available to meet the needs of children.  Make 
sure that your (and your provider’s) choice of chair and other options takes into account your child’s 
comfort, positioning,  physical limitations, and hazards that may be encountered during daily use.  

Summary of Contents for REACH
























Reviews: