Shenzhen Legevo Technology Co.,Ltd.
2
Preface
Thank you for purchasing our products. This deliberately edited manual is to
introduce the tracker with the complete technical data and the instructions showing
how to operate the device smoothly and correctly. Make sure to read this manual
carefully before using this product. Most problems could be solved through the
explanations and the troubleshooting tips. Once you finish reading it, keep it handy for
necessary reference. Please note that specification and information are subject to
changes without prior notice in this manual. Any change will be integrated in the latest
release. The manufacturer assumes no responsibility for any errors or omissions in this
document.
Attention
1
. Make sure to read this manual carefully before using this product.
2
. Please insert the SIM card before installing, and make sure the SIM card has no
password, otherwise the tracker will not work normally.
3
. Please make sure that all the cables of the tracker has been connected rightly, and
then connect the tracker to host power. Must not install or take down the tracker
when it is power on. If you found any troubles or omissions about the connections of
cables, please cut off power first, otherwise you will easily damage the tracker.
4
. The tracker works in wireless communications, so please cut off the host power
before your vehicles entering fuel depot and dangerous material place.
5
. The tracker’s work voltage is 9V-30V. Please use the tracker in the scope of work
voltage.
6
. The host of GPS tracker is a low-power wireless transmitter and receiver. It receives
and sends radio frequency signal when it is working.
7
. To avoid electromagnetic interference or uncompatible configuration, please stop
using your tracker in the noticed place.
