User’s Manual 3
H
ardware Installation
Follow the detailed procedures described in this section for easy
installation of the QDI RV2000 Graphic card onto your computer
system. The only tool needed for installation is a screwdriver.
Note!
Before installing the QDI RV2000 AGP card, touch a
metal surface of your computer to discharge yourself of static
charge, hold the graphic card by the edges be sure not to touch
the IC chips, leads or circuits.
1.
Before opening the computer cover , be sure that the
power to the computer system unit and all devices
connected to it are turned off. Disconnect the computer
from the power supply.
2.
In a typical PC computer all cover mounting screws are
located on the back of the computer. Remove these screws
and save them. Carefully remove the cover.
3.
Remove an existing VGA card or disable the mainboard
’ s
VGA.
