background image

5

Safety Information (continued)

GENERAL SAFETY

Before cleaning, repairing, or inspecting, make certain the
tines and all moving parts have stopped. Disconnect the
spark plug wire and ground against the engine to prevent
unintended starting.

Check the tines and engine mounting bolts at frequent
intervals for proper tightness. Also, visually inspect tines
for damage. Replace with the original equipment
manufacturer's (O.E.M.) parts only, listed in this manual.
Use of parts which do not meet the original equipment
specifications may lead to improper performance and
compromise safety!

Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.

Never tamper with safety devices. Check their proper
operation regularly.

After striking a foreign object, stop the engine, disconnect
the spark plug wire and ground against the engine.
Thoroughly inspect the tiller for any damage.
Repair the damage before starting and operating the tiller.

The tiller components, guards and shields are subject
to wear and damage which could expose moving parts
or allow objects to be thrown. For safety protection,
frequently check components and replace immediately
with original equipment manufacturer’s (O.E.M.) parts only,
listed in this manual. Use of parts which do not meet the
original equipment specifications may lead to improper
performance and compromise safety!

Do not change the engine’s governor setting or over-speed
the engine. The governor controls the maximum safe
operating speed of the engine.

Check fuel line, tank, cap, and fittings frequently for cracks
or leaks. Replace if necessary.

Do not crank engine with spark plug removed.

Maintain or replace safety and instruction labels, as
necessary.

Observe proper disposal laws and regulations. Improper
disposal of fluids and materials can harm the environment.

Do not modify engine.

To avoid serious injury or death, do not modify engine in any
way. Tampering with the governor setting can lead to a
runaway engine and cause it to operate at unsafe speeds.
Never tamper with the factory setting of the engine governor.

WARNING:

 This machine is equipped with an internal

combustion engine and should not be used on or near any
unimproved forest-covered, brush covered or grass-covered
land unless the engine’s exhaust system is equipped with a
spark arrestor meeting applicable local or state laws (if any).

HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Summary of Contents for 1006273116























Reviews: