Legamaster STX Series, User Manual

Page: 7 / 167

7
SAFETY INSTRUCTIONS
3. Please don‘t install the bracket directly under the sunshine or humidity / high temperature places
for fear that the quality is effected.
4. Installing the bracket over 10 cm from each wall side and begin vertical to the ground is the
suggested installing position.
2.5. RECOMMENDED USE
If you encounter a problem during installation,
please contact your supplier for assistance.
Don’t repair or open the display by yourself.
Failure to do so may result in fire or electrical shock.
Contact your dealer for inspection.
Protect and correctly use the power cord/plug.
• Don‘t pinch the power cord/plug between hard
surfaces.
• Don‘t step on the power cord/plug.
• Before inserting the power plug into the wall
outlet, connect the power cord to the display.
• Don‘t operate the display with a damaged
power cord or it may damage the display.
Using extension cords (not recommended)
If an extension cord must be used, ensure the voltage
rating exceeds the max power consumption of the
display. If the voltage rating is less than the display, it
will cause the extension cord to overheat.
If there is thunder or lightning, don’t touch the
display or the power plug.
This may cause an electric shock.
Don’t use any kind of liquid on the display.
• If liquid is spilled on the display, remove the power
and ask qualified service personnel to check the
display.
• If the liquid gets on the display’s screen, please clean
it with a dry and soft cloth immediately.
• Don’t use any harsh chemical on the display.
• If metal or liquid gets into the display, it may cause a
fire or an electrical shock.
STX-SERIES – USER MANUAL – ENGLISH