3
LS2000 / LS3000 – USER MANUAL – ENGLISH
4. OPERATING THE SOUNDBAR
Plug the AC power cord of the 19v adapter into a suitable AC power-outlet, and connect the other end to the power-port of the soundbar
.
POWER SUPPLY
Connect a source to the soundbar using a suitable cable. Connect the cable to the RCA, AUX, Optical or USB port of the soundbar, or use
the 3.5mm/RCA adapter to connect the cable.
SOURCE
Use the source-selection button on the soundbar, or the source-buttons on the remote control to select the proper source. The indicator-light
on the front of the soundbar will change color to show the different sources selected
(see above for color-explanation)
.
SOURCE SELECTION
Use the volume up and down buttons on soundbar or remote to adjust the volume.
Using the DSP buttons
(MOVIE, MUSIC, DIALOG)
on the remote, pre-set setting can be chosen that
adjust the sound settings
(bass / treble)
for specific scenario’s.
With the BASS- and BASS+ buttons on the remote, the bass output can be regulated to your liking.
With the TREBLE- and buttons on the remote, treble can be set to your liking.
SOUND AND VOLUME SETTINGS
Using the source selection button, or the BT button on the remote, switch to Bluetooth mode. The indicator will light up blue
(when a device is
already paired)
or will blink blue when in pairing mode.
Pairing a new device is only possible when no other devices are connected.
On a Bluetooth-enabled device, open the Bluetooth-settings. Make sure Bluetooth is enabled. Connect your device to by selecting LS2000
from the list of devices.
To disconnect your device, hold the BT button for a few seconds.
CONNECTING A BLUETOOTH DEVICE
USER MANUAL
