Legacy ProLine PL2215P Operating Instructions Manual Download Page 24

21

XIII.  Topaz3 / Legacy Product Warranty

Topaz3, LLC (hereinafter, “Topaz3”) warrants that the Products and included
accessories sold herein will be free from defects in workmanship or materials
under normal use and service for a period of two (2) years (one year for
accessories) from the date of purchase by the original end user, provided that the
buyer has complied with the requirements stated herein. This warranty is offered
to the initial end user and is not assignable or transferable. Topaz3 is not
responsible for any ancillary equipment which is attached to or used in
conjunction with Topaz3 / Legacy products.

If the Product fails to function under normal use because of manufacturing
defect(s) or workmanship during the two (2) years period following the
date of purchase, it will be replaced or repaired at Topaz3's option at no charge
when returned to the place of purchase. The defective unit must be accompanied
by proof of the date of purchase in the form of a sales receipt.

The sole obligation of Topaz3 hereunder shall be to replace or repair the Product
covered in this Warranty. Replacement, at Topaz3's option, may include a similar
or higher-featured product. Repair may include the replacement of parts or
boards with functionally equivalent reconditioned or new parts or boards.
Replaced parts, accessories, batteries, or boards are warranted for the balance
of the original time period. All replaced parts, accessories, batteries or boards
become the property of Topaz3.

Topaz3 shall have no obligation to make repairs or to cause replacement
required through normal wear and tear or necessitated in whole or in part by
catastrophe, fault or negligence of the user, improper or unauthorized alterations
or repairs to the Product, use of the Product in a manner for which it was not
designed, or by causes external to the Product. This warranty is void if the serial
number is altered, defaced or removed.

The user is responsible for the payment of any charges or expenses incurred for
the removal of the defective product from the vehicle or site of its use, for the
transportation of the product to the place of repair, for the return of the repaired /
replaced product to the site of its use and for the reinstallation of the product.

Continued.

Summary of Contents for ProLine PL2215P





























Reviews: