_____________________________________
USING LUMINANCE 17
A. POWER STANDBY/ON
Press this button to turn ON or STANDBY this Pre-Amplifier.
ON:
When turned ON, power is supplied and the unit becomes
operational and the STANDBY indicator in the center of this
button will be OFF.
STANDBY:
When set to STANDBY the main power is cut-off and the unit is
no longer fully operational except for the micro controller. The
STANDBY indicator lights during standby.
NOTE:
When the LUMINANCE Amp is connected to the preamp via the
mains control the indicator in the center of its button will be lit when the unit is
on and off when the unit is in standby mode.
B. REAR CHANNEL DELAY TIME UP/DOWN
These UP/DOWN buttons are used to adjust the delay time of
the REAR channels to get optimum Sound balance. The delay
time in milliseconds is indicated on the display window. The
adjustable time delay ranges are:
Dolby Digital mode: 0ms to 15ms in 1ms steps
Pro
L
ogic mode: 15ms to 30ms in 1ms steps
NOTE:
The rear channel delay time setting is for Dolby Digital and Pro Logic
mode only. These 2 buttons will not be used for “dts” and DSP surround mode.
C. CENTER CHANNEL DELAY TIME UP/DOWN
These UP/DOWN buttons are used to adjust the delay time of
the CENTRE channel to get optimum sound balance when you
play it in Dolby Digital surround mode only. The delay time in
milliseconds is indicated on the display window. The adjustable
range is 0ms to 5ms on 1ms/step.
NOTE:
The center channel delay time setting is for Dolby Digital mode only.
These 2 buttons will not be used for Dolby Pro Logic, “dts” and DSP surround
mode.
