ACC-905 PC PROGRAMMER
For PL2215P, PL2245P, PL2415, PL2445
Page -1-
October 2001
INTRODUCTION
INTRODUCTION
The ACC-905 programming software is used in conjunction with the ACC-2004 pro-
gramming cable to enable the parameters of the Legacy Proline series handheld
radios to be read, modified and printed.
The ACC-905 Software Assembly contains the following items:
3 1/2” Disk Version:
3 diskettes which include programming software and setup program or
1 ACC-905 programming manual (P/N: 680-110-2002)
CD-ROM Version:
1 CD-ROM that contains the programming software and setup program and the ACC-
905 programming manual.
System Requirements
The ACC-905 programming software requires an IBM® or compatible computer run-
ning Windows® 95 or later.
Computer
486 processor or faster (recommended)
Operating System
Microsoft Windows® 95 environment (Release 2.0 or later)
RAM
8 MB or more (16 recommended)
Hard Disk Space
3 MB
Disk Drive
3.5-inch
Communication
Port
One available communications port (COM 1, 2, 3 or 4).
Hardware Accessories
The following Hardware Accessories are required for programming:
•
ACC-2004 Programming cable
•
25-pin to 9 pin adapter (if 9-pin port is not available)
