LEGACY LIFTS®, www.legacylifts.com
Page
9
Legacy Lifts® is fully committed in its design and build for this product to be
user-friendly; as, your convenience and personal ease is fully intended in our
product supply. Our representation entities share this intent that should be
evident after product is installed and operational. Our instructions for your
convenient operations follow:
1. Engage the main electrical power supply breaker.
2. Turn the “on-off” electrical isolation switch to “on.”
3. Close all gates and latch properly.
4. Some lift products are installed with optional devices for additional safety;
and, these devices must be in proper position; e.g. pan switch.
5. After satisfying the above required conditions, the operating procedure is
simple as follows:
A. Depress the “1” button for the lift to move to Level 1.
B. Depress the “2” button for the lift to move to Level 2.
C. When applicable, Depress the “3” button for the lift to move to
Level 3.
D. Depress the “stop” button to halt the lift movement.
MAINTENANCE
Lift products are designed and built with electrical, electronic, mechanical,
and structural components that operate within an integrated system design;
therefore, periodic maintenance is appropriate. This maintenance enhances
safe operations, and further enhances longevity of the product.
Legacy
Lifts® strongly recommends that only qualified persons perform all
maintenance.
Legacy Lifts® offers with product owner approval an effective maintenance
agreement for the product addressed by this manual. Contact Legacy Lifts®
for this offering, that can be performed in cooperation with our authorized
representation upon consummating a maintenance agreement.
If the product owner elects to not contract for the above offered maintenance
agreement, but instead elects to perform product maintenance alternatively,
the following guidance is provided: