ASSEMBLY INSTRUCTIONS:
3600-622 TRESTLE TABLE
A
ssembly Procedures:
Step 1: Lay out all parts and hardware. Make sure the quantity of each is correct and the feet are free of
stain, staples, screws and nails.
Step 2: Remove the base mounting plate (C) and top mounting plate (D) from the table top (A) which is
fixed on the under side of the table top by detaching bolt, spring washer and flat washer with
wrench.
Note
: Do not throw away the hardware when you remove the mounting
plates (C&D)
from the under
side of table top.
Step 3: Assemble the short & long stretchers (F&G) to the table legs (E) as shown.
Step 4: Assemble the table legs (E) and short stetchers (F) to the base mounting plate (C) as shown.
Step 5: Place the table top (A) face down on a clean soft flat surface such as a blanket and ensure the
surface is clear of any objects that could scratch or damage the top.
Assemble the legs with base mounting plate (C) to the top mounting plate (D) and table top (A)
as shown.
Step 6: Turn the table to its upright position. Unlock the lock mechanism under the table top before
pulling it apart and then carefully insert or remove the table leaf.
Use adjustable levelers as necessary.
Note
: If handled improperly, the act of installing and removing table leaves may damage the table.
Please use caution and delicate handling when installing and removing table leaves to prevent
damaging the table top surface and edges. It is best two persons are involved when installing or
removing table leaves.
Caution: Over-tighting screws or bolts may result in damage. It is suggested that at least two people
work together for this assembly process to avoid injury. Following assembly, the furniture should be
cleaned with a quality, non-silicone furniture polish on a clean, soft cloth.
www.legacyclassic.com
