Lefroy Brooks M2-4403 Installation, Operating,  & Maintenance Instructions Download Page 10

10

Guarantee

Guarantee of Quality

This product is guaranteed against faulty materials and workmanship for 12 months from date 
of purchase. For the guarantee to be valid, the unit must be installed by a competent person, in 
accordance with the instruction booklet.

Any part found to be defective during the guarantee period, will (at our option) be repaired or 
replaced, free of charge, provided the unit has been installed, and properly used in
accordance with the instruction booklet.

Our products correspond to the valid technical and water supply standards as well as the relevant 
approvals requirements. We guarantee them to be free of design and production faults at the time 
of delivery and that with correct use and care in accordance with our printed instructions they will 
function reliabl

y.

Guarantee period

s

The guarantee is valid in private homes for 5 years from the purchase date. Proof of purchase 

   has to be provided when making a guarantee claim.

s

 By use in commercial or institutional applications the guarantee is valid for 1 year after first use. 

 

To make a guarantee claim, proof of purchase or, the beginning of use is required. 

Not Covered by this Guarantee

Damage or defects arising from incorrect installation, improper use or lack of maintenance.
Installed product damaged in transit Consequential loss, damage or product removal and installation 
costs.

Lefroy Brooks is not responsible for any on site labour charges.

Summary of Contents for M2-4403












Reviews: