- 2 -
Thanks for choosing Leetro’
s product.
You are required to read through this manual carefully before using MPC6535.
MPC6535 is designed exclusively for the laser equipment. This high-performance
controller is based on the hardware solution of DSP+FPGA.
1. Packing List
Please check out the pack with below list. If there is something broken or lost, please contact you
supplier instantly.
No
Part Name
PCS
Description
Standrad/Optional
1
MPC6535
1
Controller board with Aluminum case
S
2
USB-AB-3M
1
Cable connected between PC and the MPC6535
S
3
PAD03-E
1
Operation panel with English interface
S
4
C4-PAD03-1.5M
1
Cable connected between PAD03 and the MPC6535
S
5
U-disk
1
USB flash memory disk
S
6
Dongle-white
1
LaserCut software key
S
7
STD-01
1
Single converter module (single-ended to differential)
O
8
PAD03-TR
1
Operation Panel with Turkish interface
O
9
PAD03-C
1
Operation panel with Chinese interface
O
2. Quick Start
2.1 Run the setup.exe and follow the “next step”instruction to install LaserCut program into your
computer.
2.2 Install MPC6535 controller board: mounting the board in the machine firmly. Must make the
machine house wires with GROUND!
3.
Wiring Diagram
3.1 Size (mm)
