Leetek Guestcall QBTLTK-P1200, Operational Description

Page: 7 / 11

•
Press the “ CANCEL ” key to stop the range test. Press the “ CANCEL ” key again to exit the system
programming menu.
NOTE : The transmitter has an auto shut off feature that will stop the range test after 15 minutes .
5 . program to pager
Press Pager # to change the Number of Pager.
•
Connect the programmer to Hole-Pin of Coaster Pager.
At the same time , Enter Pager # to modification, and then press the “ENTER” key,
• Verify OK sign: Beep sound & LED blinking.
• Press only Pager # to change the Number.
•
Base ID & Group ID reserve a seat beforehand.(It is marked by numeral)
QBTLTK-P1
Handing out the Coasters:
Give the guest a coaster. Note their name and Coaster number on the sign out sheet(Included).
Tell the guest the coaster will signal when their table(or Food) is ready. The default page for this system is for the
coaster to flash and vibrate for 3 minutes. After the coaster is finished vibrating it automatically goes back into
standby mode waiting for the next page. You can hand the coasters out right from the charging stack (They will
“demo” Page each time they are removed from the stack) or you can simply store them in a basket and hand them
out. A fully
Charged coaster will function without being recharged for 8 – 12 hours.
(The Charging Light on the chargerbase : RED Color.
The Indicator of fully charged Coaster on the chargerbase : GREEN Color)
Paging the Guest:
When the guest’s table( or food) is ready simply press the coaster number on the transmitter
Keypad followed by the “send” key. For example. Press “11,
šŒ•‹ šŒ•‹ šŒ•‹ šŒ•‹ ” and coaster # 11 will signal.
Out of range Feature
With this feature, the coaster will play a melody to inform your customer that they are out of
range and will miss their page. The melody will only stop if they are within range. Default from
the factory is Out of Range Off (Transmitter setting)
• Out of Range On ( After sending the signal, all the coasters will light up once to tell you that they received
the ON code. -
GGGGj“–Š’žšŒG“Ž›•Ž j“–Š’žšŒG“Ž›•Ž j“–Š’žšŒG“Ž›•Ž j“–Š’žšŒG“Ž›•Ž 2
•
Out of Range Off ( After sending the signal, all the coasters will light up once to tell you that they received
the OFF code .- h•›G h•›G h•›G h•›G
–
Š“–Š’žšŒG“Ž›•Ž Š“–Š’žšŒG“Ž›•Ž Š“–Š’žšŒG“Ž›•Ž Š“–Š’žšŒG“Ž›•Ž )
To turn the Out of range feature an follow these procedures:
Remove all the coasters from the charging base or simply unplug the power supply that is connected to the
charging unit. Please select the “Out of Range ON” in SETUP MODE of the Transmitter.
After making a selection,
press the “enter” key. All the coasters will light up to tell you that they have received the new code. To test the
coasters, unplug the power supply that is connected to the LEETEK transmitter. After 45 seconds, all the coasters
will play a melody since they are not receiving a signal from the transmitter. Return all the coasters to the charging
base or plug in the power supply. The coasters are ready to receive a page with the out of range feature turned on.
Follow the same procedure to turn the out of range feature off, but use the “Out of Range OFF” in SETUP MODE of
the transmitter.
Alert stop Feature
To stop the page, from the transmitter press # “11”- enter - 99 -send
This will put coaster # 11 to stop the page individually (Do not put it to sleep all we need is to stop the page). To
repage, press “ 11, send ” and coaster #11 will signal.