Lees 200W BEAM LIGHT 7R, User Manual

Page: 4 / 15

4
Thank you for your patronage. We are confident that our excellent products and
service can satisfy you. For your own safety, please read this user manual carefully
before installing the device.
In order to install, operate, and maintain the lighting safety correctly. We suggest that
the installation and operation should be done by the verified technician and follow the
instruction strictly.
A CAUTION!
Keep this device away from rain and moisture!
CAUTION!
Unplug mains lead before opening the housing.
Every person involved with the installation, operation and maintenance of this device
has to:
-be qualified
-follow carefully the instructions of this manual
INTRODUCTION
:
Thank you for having chosen this professional moving head.
You will see you have acquired a powerful and versatile device.
Unpack the device. Inside the carton box you should find:
1. One power cable
2. One 3pin DMX cable
3. Two omega clamps
4. One user manual
ㄍ
Flight case, Safety cable and Clamps are optional, please contact your dealer
ㄎ
Please check carefully that there is no damage caused by transportation. Should
there be any, please consult your dealer and don’t install this device.
GENERAL GUIDELINES
This device is a lighting effect for a professional use on stages, in discotheques,
theatres, etc., The device was designed for indoor use only.
This fixture is only allowed to be operated with the max alternating current which
stated in the technical specifications in the last page of this manual.
Lighting effects are not designed for permanent operation. Consistent operation
breaks may ensure that the device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
While choosing the installation-spot, please make sure that the device is not exposed
to extreme heat, moisture or dust. Please don’t project the beam onto combustible
substances. The minimum distance between light-output from the projector and the
illuminated surface must be more than 0,5 meter.