Leenders WoodBee, Manual

Page: 6 / 16

The WoodBee is to be assembled by two persons.
Safety instructions
Make sure to keep these instructions.
The parts may have sharp edges; use protective gloves when assembling the
WoodBee.
Tighten all bolts and nuts firmly to ensure a sturdy construction.
Make sure the WoodBee is placed on a flat and solid surface.
The WoodBee has been designed exclusively for storing stove wood and is definitely not
a plaything or climbing frame. Ensure that it is not used that way since this may cause
a highly dangerous situation.
Note: this product is made of CorTen steel. This metal imparts with the passage of time
a uniform, thin rust film to the product. This rust film effectively retards the rusting
process.
Parts supplied with delivery of 1 module
3x cell part
3x connecting strip
36x mushroom head bolt M8, with washer and nut (delivery usually includes 1
additional set)
Tools required (not included)
Open-end spanner or ring spanner 13mm
Possibly, a large screwdriver which can be helpful in positioning the holes
1 module